Instructions For Use Magnifier Luminaire RLLQ 63 (R) „RING LED"
ENG
Connection
Fig. 15
15.1
CAUTION
Damage caused by
wrong connection!
An unsuitable operating unit or a
wrong connection can result in
destroying the light.
¾ Operate the light with the op-
erating units delivered by the
manufacturer only.
¾ Before putting the light into
operation, the user has to check
whether the mains voltage is
identical with the rated voltage
and frequency specified on the
rating plate.
Operating unit
As a standard feature, the luminaire
is delivered with a plug-in power
supply unit (see Fig. 15).
The plug-in power supply unit can
be connected to any earthed or
Euro socket.
To adapt it to the existing con-
nector system e. g. for use in the
US), the plug-in unit [15.1] can be
exchanged.
Note
Upon request, additional plug
parts (Fig. 16) will be enclosed
with the light.
Fig. 16
16.1
16.2
21