Mounting The Unit In The Dashboard; Detaching And Attaching The Front Panel; Fuse Replacement - Sony MEX-GS820BT Bedienungsanleitung

Mounting the unit in the
dashboard
Before installing, make sure the catches on
both sides of the bracket  are bent
inwards 2 mm ( 3 /
32
CAUTION
Do not touch the left side of the unit when
removing from the dashboard. The
heatsink on the left side of the unit
remains hot right after use.
1
Position the bracket  inside the
dashboard, then bend the claws
outward for a tight fit.
53 mm (2

2 Mount the unit onto the bracket ,
then attach the protection collar .

Notes
• If the catches are straight or bent outwards, the
unit will not be installed securely and may spring
out.
• Make sure the 4 catches on the protection collar
 are properly engaged in the slots of the unit.
40
GB
in).
182 mm (7 1 /
1 / in)
8
Catch



Detaching and attaching the front
panel
For details, see "Detaching the Front Panel"
(page 7).
Resetting the unit
For details, see "Resetting the Unit" (page 8).

Fuse replacement

When replacing the fuse,
be sure to use one
matching the amperage
in)
4
rating stated on the
original fuse. If the fuse
blows, check the power
connection and replace the
fuse. If the fuse blows again after
replacement, there may be an internal
malfunction. In such a case, consult your
nearest Sony dealer.
Fuse (15 A)