Herunterladen Inhalt Inhalt Diese Seite drucken

Sony MEX-GS820BT Bedienungsanleitung Seite 34

Bluetooth audio system
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 42
UNKNOWN: A name or phone number
cannot be displayed.
WITHHELD: The phone number is hidden by
the caller.
For Sony | Music Center operation:
APP --------: A connection with the
application is not established.
 Make the "Sony | Music Center"
connection again (page 17).
APP DISCNCT: The application is
disconnected.
 Make the "Sony | Music Center"
connection (page 17).
APP DISPLAY: A screen setting display of
the application is open.
 Exit the screen setting display of the
application to enable button operation.
APP LIST: The contents list of the CD/USB/
iPod is open.
 Exit the list of the application to enable
button operation.
APP MENU: A setting display of the
application is open.
 Exit the setting display of the application
to enable button operation.
APP NO DEV: The device with the
application installed is not connected or
recognized.
 Make the BLUETOOTH connection and
establish the "Sony | Music Center"
connection again (page 17).
APP SOUND: A sound setting display of the
application is open.
 Exit the sound setting display of the
application to enable button operation.
OPEN APP: The "Sony | Music Center"
application is not running.
 Launch the application.
34
GB
For steering wheel remote control
operation:
ERROR: An error occurred during the
function registration.
 Register again from the function where
the error occurred (page 20).
TIMEOUT: The function registration failed
due to a timeout.
 Try completing the registration while
[REGISTER] is blinking (about 6 seconds)
(page 20).
For firmware update operation:
ERROR: The updater is not stored in the USB
device.
 Store the updater in the USB device, then
try again (page 24).
NO DEVICE: The USB device containing the
updater is not connected or recognized.
 Make sure the USB device is securely
connected.
 Disconnect the USB device, then connect
the device again.
UPDATE ERROR - PRESS ENTER: Firmware
update is not completed properly.
 Press ENTER to clear the message, then try
again.
During the update, do not turn the
ignition to the OFF position, nor remove
the USB device (page 24).
If these solutions do not help improve the
situation, consult your nearest Sony dealer.
If you take the unit to be repaired because of
CD playback trouble, bring the disc that was
used at the time the problem began.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis