Herunterladen Diese Seite drucken

Nordpeis Panama EU Standard Montageanleitung Seite 30

Kamineinsatz

Werbung

Panama EU (Standard) - Straight_Q-23FL / Corner_ Q-34AL
FIG 7
A
wall part before placing it. See FIG Panama EU AIR for measurements.
Achtung! Wird das Produkt mit einer separaten Luftzufuhr verbunden, muss das
Rückwandelement vor der Aufstellung dafür vorbereitet werden. Siehe Abb. Panama EU AIR für
Abmessungen.
Panama EU Low - Straight_Q-23FL / Corner_Q-34AL
Attention ! Si le produit doit être raccordé à une amenée d'air frais séparée, veillez à préparer la
plaque pare-feu avant de la mettre en place. Voir FIG Panama EU AIR pour les mesures.
Attenzione! Se l'inserto deve essere collegato nella parte posteriore all'aria esterna, eseguite prima i
fori sulla piastra. Vedi FIG. PANAMA EU AIR per le misure.
Huom! Jos takka liitetään erilliseen palamisilman syöttöön, valmistele suojaseinälevy ennen
30
Place the firewall plate behind the insert
Attention! If the product is to be connected to a separate air supply, make sure to prepare the fire-
Bringen Sie das Rückwandelement an.
Placez la plaque pare-feu derrière l'insert.
Posizionate la piastra di protezione posteriore.
Asenna suojaseinälevy takkasydämen taakse
asennusta. Katso mitat KUVASTA Panama EU AIR (ILMA).
B
!kg
CO-PAN01-040 x1

Werbung

loading

Diese Anleitung auch für:

Panama eu lowQ-23 flQ-34 alFp-pan01-x00