Special Accessory Installation - Truma Mover Te R Gebrauchsanweisung

6. For attachment in front of the axle on the
AL-KO chassis M with continuous frame
The AL-KO chassis M adapter set (part no. 60031-02000)
must be used in order to compensate for overlapping frame
edges.
7. Installation on the Eriba Touring chassis
It is essential to use the Eriba Touring mounting set for the
Eriba Touring chassis
.
8. For mounting behind the axle on the Eriba Troll chassis
The Eriba-Troll mounting set is required for mounting behind
the axle on the Eriba Troll chassis .
9. Installation on chassis with L-profile and with a lim-
ited amount of space
The short mounting system is required to compensate for
the height (30 or 60 mm) with substructures such as tanks.

Special accessory installation

1. 30 mm spacer set
For compensating for height on caravans / trailers with a
frame height of < 170 mm to 140 mm,
part no. 60030-95000.
Figure 9
2. 60 mm spacer set
To compensate for the height for caravans / trailers with a
frame height of < 140 mm to 110 mm,
part no. 60030-95100.
Figure 10
3. Low chassis kit
For compensating for height on caravans / trailers with a
frame height of less than 110 mm and / or for bridging struts,
part no. 60010-64900.
Figure 11
If this installation kit is used in Germany, acceptance
by a vehicle expert is required.
4. Low chassis kit, short
For compensating for height on caravans / trailers with a
frame height of less than 110 mm,
part no. 60030-37600.
Figure 12
If this installation kit is used in Germany, acceptance
by a vehicle expert is required.
5. AL-KO Vario III / AV installation kit
Essential for caravans with AL-KO Vario III / AV chassis
(frame thickness less than 2.8 mm),
part no. 60010-21500.
Figure 13
6. AL-KO Chassis M
Adapter set for chassis with an offset axle and a per-
mitted gross weight of up to 1800 kg
Mounting set for compensating for frame edges for caravans
with AL-KO chassis M. The mounting set is needed for mount-
ing in front of the axle,
part no. 60030-38600.
Figure 14
7. AL-KO Chassis M
AL-KO Chassis M adapter set for chassis with a con-
tinuous frame and a permitted gross weight of 1900 kg
to 2000 kg
Mounting set for compensating for frame edges for caravans
with AL-KO chassis M. The mounting set is needed for mount-
ing in front of the axle, part no. 60031-02000.
Figure 15
8. Mover® mounting set
for Eriba Touring
Part no. 60030-09000
Figure 16
23