Upgrading The Software - Samsung LE40A699 Bedienungsanleitung

Upgrading the Software

To keep your product up-to-date with new Digital Television features then software upgrades are periodically broadcast as
part of the normal Television signal. It will automatically detect these signals and display the software upgrade banner. You
are given the option to install the upgrade.
Insert a USB drive containing the irmware upgrade into the WISELINK port
1.
on the side of the TV.
2. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER
Press the ▲ or ▼ button to select "Software Upgrade", then press the
3.
ENTER button.
Press the ▲ or ▼ button to select "BY USB", "BY Channel" or "Standby
4.
Mode Upgrade". Press the ENTER

BY USB :
- Preset : Insert a USB drive containing the irmware upgrade into TV.
➣
Please be careful to not disconnect the power or remove the USB
drive while upgrades are being applied. The TV will turn off and turn on
automatically after completing the irmware upgrade. Please check the
irmware version after the upgrades are complete. When software is
upgraded, video and audio settings you have made will return to their
default (factory) settings. We recommend you write down your settings so
that you can easily reset them after the upgrade.

BY Channel :
Upgrades the software using the broadcasting signal.

Standby Mode Upgrade :
To continue software upgrade with master power on, Select On by pressing
the ▲ or ▼ button. 45 minutes after entering standby mode, a manual
upgrade is automatically conducted. Since the power of the unit is turned
on internally, the screen may be on slightly for the LCD product. This
phenomenon may continue for more than 1 hour until the software upgrade is
completed.

Alternative Software :
To display the software version information.
button.
English - 4
TV Side Panel
Energy Saving
button.
PIP
Software Upgrade
Common Interface
Software Upgrade
Current Version
BY USB
BY Channel
Standby Mode Upgrade
Alternative Software
Move
USB Drive
: Off
►
2008/01/01_000075
►
: On
----/--/--_--------
Enter Return