Seite 1
Bitte lesen Sie diese Anleitung vor der ersten Inbetriebnahme komplett und sorgfältig, sie enthält zahlreiche Hinweise zur bestimmungsgemäßen Installa- tion dieses Tür-Fenster-Melders. ELV Elektronik AG • Postfach 1000 • D-26787 Leer • Telefon 04 91/600 888 • Telefax 04 91/6008-244...
3. Installation 3.1 Hinweise zur Montage · Da der FAZ 3000-TF intern an der linken und an der rechten Seite mit je einem Magnetsensor ausgestattet ist, kann die Montage des Magneten links oder rechts erfolgen. Eine beidseitige Montage, d. h. links und rechts je ein Magnet, ist nicht möglich.
· Der Abstand zwischen Magnet und FAZ 3000-TF sollte nicht größer als 25 mm sein, um eine sichere Funktion zu gewährleisten (Abbildung 1). · Die Befestigung des Magneten und des FAZ 3000-TF kann mit dem beiliegenden doppelseitigen Klebeband erfolgen. Zur sabotagegeschützten Montage können beide Komponenten ebenfalls durch Schrauben befestigt werden.
Grundsätzlich gilt: Mit der Funktion „extern scharf” wird das Objekt bei Abwesenheit überwacht, d. h. Außenhaut und Innenräume. Unabhängig von der Zuordnung lösen alle Sensoren Alarm aus. Die Funktion „intern scharf” realisiert eine Außenhautsicherung. Es dürfen lediglich die Sensoren reagieren, die an der Außenhautsicherung beteiligt sind, z. B. Tür- Fenster-Melder.
· Sind alle Sensoren angemeldet, wird der Vorgang durch 3maliges Betätigen der Taste „←C” abgeschlossen. 5. Technische Daten FAZ 3000-TF Batterien:2 x Micro AAA (+ 1 x Micro AAA und 3 x LR44 bei zus. Glasbruchmelder) Zus. Magnetsensoren: ..........normal geschlossenen (NC) Zus.
Seite 8
ELV Elektronik AG • Postfach 1000 • D-26787 Leer • Telefon 04 91/600 888 • Telefax 04 91/6008-244...
Seite 9
Please read these instructions fully and completely before initial commission- ing; they contain information for the correct installation of the door/window transmitter. ELV Elektronik AG • Postfach 1000 • D-26787 Leer • Tel.: +49 (0)4 91/600 888 • Fax: +49 (0)4 91/6008-244...
Seite 11
1. CONTENTS 2. GENERAL ............. 12 3. INSTALLATION ............. 12 3.1 Instructions for installation ........ 12 3.2 Installation of the FAZ 3000-TF ......13 4. REGISTERING WITH THE BASE STATION ..13 4.1 General information ..........13 4.2 Registering ............14...
3. Installation 3.1 Instructions for installation · As the FAZ 3000-TF is equipped internally with magnetic sensors (one on the left and one on the right side) installation of the magnets can be either on the left or on the right. Installation of the magnets on both sides, i.e. a magnet on both the left and right side is not possible.
FAZ 3000-TF should not be greater than 25 mm, to ensure perfect functioning (Figure 1). · The magnets and FAZ 3000-TF can be attached with the enclosed double-sided adhesive tape. For sabotage-free installation both components can be fixed with appropriate screws.
Basically the following is true: With the “external activated” the object is monitored when the house is vacant, i.e. outer skin and internal rooms. Independent of assign- ment all sensors trigger alarms. The “internal activated” function implements outer skin security. Only those sensors that participate in outer skin security should react, e.g.
· When all sensors are registered, the procedure is terminated by pressing the “←C” key three times. 5. FAZ 3000-TF technical data Batteries:2 x Micro AAA (+ 1 x Micro AAA and 3 x LR44 with additional glass break- age transmitter) Additional magnet sensors: .............
Seite 16
ELV Elektronik AG • Postfach 1000 • D-26787 Leer • Tel.: +49 (0)4 91/600 888 • Fax: +49 (0)4 91/6008-244...