Herunterladen Inhalt Inhalt Diese Seite drucken

Automatic Shut-Off Time; Charging Status - Hensel PORTY 6 Lithium Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

15:
7:
HENSEL Studiotechnik

Automatic shut-off time

To save the battery pack, the PORTY unit turns off
automatically after a predefined period of time.
Setting the automatic shut-off time
Press the two direction buttons beside the display 15
simultaneously for setting the automatic shut-off time. The time
is adjustable within a range of 0 - 60 min as shown on the digital
display 15 (disregard the decimal point, e.g. 0.2 means 2 min.
shut-off time).
To disable the automatic shut-off, press the direction buttons
until „−.−" appears on the display. After about 2 sec. the display
automatically switches to the display of f-stop values.
Delivery status is 15-minute auto shut-off time.

Charging status

After switching on the power pack, the capacity of the battery
pack is shown by lighting up of the respective control LED on
the charging display 7. Due to the system, the LED charging
indicator 7 of the battery pack can only be an approximate
indication. The capacity, that means the number of flashes,
which can be taken, depends upon numerous factors, e.g.
status of charging, temperature, age of the battery pack, etc.
Completely new battery packs only achieve full capacity after
approx. 3 to 5 charges. The capacity of the battery pack can
also be checked with the power pack switched off. For this
purpose, press the ‚Check' key on the battery pack drawer
and the charging status is displayed by the respective LED.
Charging status during operation and stand-by:
After pressing the ‚Check' button, the charge status is indicated
by lighting up of the respective LED as follows:
no LED lights up:
red LED:
yellow LED:
green LED:
When the battery pack shuts off due to overcurrent, all 3 LEDs
are blinking. In general, this error is reset after about 20 sec.
Charging status during charging process:
Is the battery pack connected to the Charger, the charging
status is displayed by the LEDs as follows:
red LED blinking:
red LED permanent, yellow blinking:
red + yellow LED permanent, green blinking: >50%
red, yellow and green LED permanent:
no LED lights up:
User Manual PORTY Lithium Power Pack
battery pack completely discharged, shut-off
</= 10%
>10% und </= 50%
>50%
</= 10%
>10% and </= 50%
>85%
battery pack charged
13

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Porty 12 lithium

Inhaltsverzeichnis