Replacement Of The Battery Pack Drawer; Charging Of The Battery Pack - Hensel PORTY 6 Lithium Bedienungsanleitung

8:
OFF
Charging socket
HENSEL Studiotechnik

Replacement of the battery pack drawer

Hints to PORTY battery pack
•
The HENSEL PORTY item must only be operated with the
original HENSEL Li-ion battery and the HENSEL charging
units.
•
The battery pack is not to be opened or removed from the
battery pack drawer.
•
Battery packs contain substances that are corrosive and
injurious to health, therefore, the safety hints printed on the
battery pack must be observed.
•
The battery pack must be protected against vibration,
humidity, and high temperatures and must not be used in
explosive environments.
•
When working with the PORTY at low temperatures, the
battery pack should be stored in a warm room before
starting-up to achieve a higher power output.
•
The battery pack should be connected to the charging unit
no longer than 24 hours.
Removing the battery pack drawer
1. Switch off the unit using the main switch 8.
2. Press down the push-button (PUSH) of the battery pack
drawer and pull it out forward.
Inserting the battery pack drawer
To insert the battery pack drawer push the drawer into the unit
until you can hear it snapping in.

Charging of the battery pack

The Li-ion battery pack can be charged using the charging
socket at the battery pack drawer. During the charging process,
the drawer can be placed inside or outside the PORTY housing.
Only use the HENSEL charging unit Lithium (Code 5672) for
the charge of the Li-ion battery pack.
The Lithium charger has no main switch. The provided AC
power cable is plugged into the mains socket of the Charging
Unit Lithium and then connected to the mains wall socket.
The charging plug is plugged into the PORTY charging socket
at the battery drawer and safely screwed into the socket.
Correct connection is indicated by the red light of the Power
Control LED.
The charge of the Lithium-ion battery pack starts after
pressing the 'Wake up' button.
The Battery Charger Lithium must only be connected to
earth connected mains circuits.
User Manual PORTY Lithium Power Pack
11