Hensel PORTY 6 Lithium Bedienungsanleitung Seite 45

15
4
2, 4
2, 4
HENSEL Studiotechnik
The key with the single arrow increases and decreases, rsp.,
the power output by 1/10 increments, the double arrow key by 1
f-stop. The values are shown on display 15 as follows:
10 equals 1200 J (Porty 12 Li) and 600 J (Porty 6 Li), rsp.
9.0 equals 600 J (Porty 12 Li) and 300 J (Porty 6 Li), rsp.
8.0 equals 300 J (Porty 12 Li) and 150 J (Porty 6 Li), rsp.
7.0 equals 150 J (Porty 12 Li) and
6.0 equals 75 J (Porty 12 Li) and
5.0 equals 38 J (Porty 12 Li) and
4.0 equals 18 J (Porty 12 Li) and
Power control of channel B:
As described above, repeated pressing button 4 switches the
connected flash head to the maximum possible power output
(for PORTY 12 Li max. 600J and for PORTY 6 Li max. 300J) or
switches the head off. Using the up and down keys, the power
output can be precisely adjusted within a range of 7 f-stops (see
above).
Power control with flash heads connected to channel A and B:
Symmetrical operation
After the same power output for both channels A and B has
been set by repeated pressing the buttons 2 and 4 (600J for
Porty 12 Li; 300J for Porty 6 Li), the power is symmetrically
distributed through the 2 connected flash heads. The precise
adjustment is done by using the up and down keys as
described above.
Power control with flash heads connected to channel A and B:
Asymmetrical operation
By repeated pressing the buttons 2 und 4 the following power
distribution can be selected:
Porty 12 Li: Option1
Option2
Porty 6 Li: Option1
Option2
For both options, the power output through the channels A
and B can be equally reduced using the up and down keys.
User Manual PORTY Lithium Power Pack
75 J (Porty 6 Li), rsp.
38 J (Porty 6 Li), rsp.
18 J (Porty 6 Li), rsp.
A = 900J B = 300J Display 10-6,7
A = 600J B = 300J Display 9.6-6.3
A = 450J B = 300J Display 10-6,7
A = 300J B = 150J Display 9.6-6.3
9 J (Porty 6 Li), rsp.
15