Display Brightness - Akai AC-166 Bedienungsanleitung

• In standby mode, press the DIMMER button to change the brightness level
of the display (mid/low/off/hi level)
• Press the BACKLIGHT ON/OFF button to switch on or off the backlight.
When the backlight is switched on, the current brightness level (1-5) shows
briefly on the display.
• Press the BRIGHTNESS button repeatedly to change the brightness level
(1-5).
USB charging : DC 5V 1.5A
The unit can charge for mobile phone via USB cable (the USB cable is not be
supplied).
The radio cannot access the contents in the connected external device.
Frequency:
Power consumption
Standby power consumption <1W
Battery backup
AC power adaptor:
Net weight
Dimensions
Due to continual revision and improvement on our products design,
specifications are subject to change without further notice.

DISPLAY BRIGHTNESS

BACKLIGHT
CHARGING EXTERNAL DEVICE
SPECIFICATIONS
FM: 87.5 – 108 MHz
7.5W
3V 1xCR2032 flat lithium battery (not included)
Input: AC 100-240 V, 50/60 Hz
Output: DC 5V 1.5A
0.29 kgs
208 L x 37 D x 91 H mm
IMPORTANT:
21