Disposal; Returns; Information - Gemü 3021 Original - Betriebs- Und Montageanleitung

5. Determine sensor version:
Round version
6. Round version (no longer available):
Optional position of the electronics
housing in the body retainer a.
Double flats version:
Position of the electronics housing in the
body retainer d:
With 90° rotation turn electronics
housing and sensor in the same
direction.
With 180° rotation of the electronics
housing do not turn the sensor
7. Clean all parts of the remains of product
and contamination. Do not scratch or
damage parts during cleaning!
8. Check all parts for potential damage.
9. Replace damaged parts (only use
genuine parts from GEMÜ).
10. Fix electronics housing 3 with fastening
bolts 2 on the turbine 4.
11. Fully tighten the fastening bolts 2 (4x)
diagonally with an Allen key.
3021
Double flats version
48 / 52
12. Place the plastic caps 1 (4x) on the
fastening bolts 2 and press firmly.
12

Disposal

All device parts must be
G
disposed of according to
relevant local or national
disposal regulations / envi-
ronmental protection laws.
Pay attention to adhered resi-
G
dual material and gas diffu-
sion from penetrated media.
13

Returns

Clean the flow transmitter.
G
Request a goods return declaration form
G
from GEMÜ.
Returns must be made with a completed
G
declaration of return.
If not completed, GEMÜ cannot process
credits or

repair work

but will dispose of the goods at the
operator's expense.
Note for returns:
Legal regulations for the protection
of the environment and personnel
require that the completed and
signed goods return declaration
is included with the dispatch
documents. Returned goods can
be processed only when this
declaration is completed.
14

Information

Note on staff training:
Please contact us at the address
on the last page for staff training
information.
Should there be any doubts or
misunderstandings in the preceding text,
the German version of this document is the
authoritative document!