Noch ras-Master 4.0 PROFI Set Gebrauchsanleitung Seite 16

Fill the Flock Change Container (4) with NOCH grass fibres
(see note E).
You can preset the high voltage using the rotary control
(13) (see note F).
To protect the crocodile clip on your device from soiling,
insert a nail made of conductive material, for example, into
the surface coated with grass glue and fix the opposite
pole with the crocodile clip (12).
To insert another grass fibre, simply replace
the container in no time at all (see note
E). The NOCH Flock Change Container is available
separately at (item no. 60127).
Place the Flock Change Container (4) onto the handle (1)
and make sure that the bayonet catch engages with a soft
click' (see note E).
Once you have prepared your NOCH Gras-Master 4.0
PROFI, coat the to be grassed surface evenly with NOCH
Grass Adhesive.
Switch on the device (see note F) and fluff the grass fibres
by shaking gently. If necessary, you can now readjust the
high voltage on the appliance using the control dial (13).
Switch off the device after applying the grass fibres.
This allows different grass fibres to be flaked into each
other and colours and lengths to be varied and thus
perfectly blended.