The Noch Gras-Master 4.0 Profi In Detail - Noch Ras-Master 4.0 Profi Set Gebrauchsanleitung

local regulations for waste disposal. Check the current
version of the WEEE Directive. Remove any batteries or
rechargeable batteries before scrapping the product.
Basic mode of operation:
The centrepiece of the NOCH Gras -Master 4.0 PROFI
is an electronic circuit that converts the battery voltage
3.7 V into a permanent high voltage of approx. 10-20
kV. The base of the Flock Change Container (4) is
equipped with a conductive metal plate (5). In the
operating state, this is connected to the high voltage,
while the earth is connected to the red antipole cable
(12). During operation, a strong electrical field forms
between the high voltage and the earth. The grass fib-
res are charged by electrons in the container after the
Gras-Master 4.0 PROFI is switched on. After the fibres
emerge through the sieve (6), they are connected to the
ground (e.g. model landscape provided with grass glue)
where, after adhering, they stand up vertically due to
A. The NOCH Gras-Master 4.0 PROFI in detail:
(1) Handle with electronics and integrated battery
(2) Base of the handle with opening for transferring the
high voltage to the Flock Change Container
(3) Cover of the handle (with I/0 switch,
USB-C charging socket, LED status display, rotary control)
(4) Flock Change Container
(5) Electrically conductive base plate
(6) Sieve top
(7) Ball bayonet catch
(8) I/0 switch (I = on / 0 = off)
(9) USB-C charging socket
(10) LED status display
(11) USB-A to USB-C charging cable
(12) Opposite pole (earth cable with crocodile clip)
(13) High voltage rotary control
(14) XL Flock Change Container incl. 3 sieves and lid
(15) Detail Flocker incl. 3 sieves and lid
the electric field. An electrically conductive surface is
therefore necessary for good function. This is provided
by the conductive NOCH Grass Adhesive (refs. 60130
and 60131).
Caution: Even after switching off the device,
high voltage is still present for a short time.
For this reason, never touch the base of the Flock
Change Container (5), not even when filling or remo-
ving flock material. The special protected construc-
tion minimizes power consumption and achieves a
maximum safety.
(3)
(1)
(12)
(11)