VEVOR XL3265A Originalanleitung

Mechanics Tool Set
Model: XL3265A
This is the original instruction, please read all manual instructions carefully before operating.
VEVOR reserves clear interpretation of our user manual. The appearance of the product shall
be subject to the product you received. Please forgive us that we won't inform you again if
there is any technology or software updates on our product.
01
WARNING: To reduce the risk of injury, the
user must read the instructions manual carefully.
1.Use as intended only. The mechanics tool set is
not a toy, and it cannot be played by children to
prevent children from eating it by mistake.
2.The mechanics tool set cannot be used to injure
people maliciously.
3.Flammable: Keep away from open flame. This
product box will ignite and burn if brought into
contact with an open flame.
4.Keep away from sharp points, blades and other
items, so as not to scratch the product box.
SAVE THESE INSTRUCTIONS
Parts List
Item Qty Specific Model
combination wrench 16 SAE 5/16, 3/8, 7/16, 1/2, 9/16 in.
Metric 11, 12, 13, 14, 15, 16,
17 mm
Mini 13/64 , 7/32 in., 5, 6 mm
72-tooth quick-re- 3 1/4 & 3/8 & 1/2 in. drive
lease ratchet handle
extension bars 6 1/4"x1-1/2", 1/4"x3", 3/8"x1-1/2",
3/8"x3", 3/8"x6", 1/2"x3"
adapters 6 1/4"Mx3/8"F, 3/8"Mx1/4"F,
3/8"Mx1/2"F, 1/2"Mx3/8"F,
25mmMx1/4''F, 1/4"DR. bit
adapter
sockets 191 /
bits 187 /
02
hex keys 40 short arm:
1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5,
6 mm, 1/16, 5/64, 3/32, 7/64,1/8,
9/64, 5/32, 3/16, 7/32, 1/4 in.
long arm:
1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5,
6 mm, 1/16, 5/64, 3/32, 7/64,1/8,
9/64, 5/32, 3/16, 7/32, 1/4 in.
bit driver handle 1 /
The main material of the parts is CR-V.
Maintenance
1. Put the mechanics tool set back into the storage
box after use to avoid loss of parts.
2. Mechanics tool set should be stored indoors to
avoid prolonged outdoor exposure.
3. If dirt and dust are found on the tools, please
clean them in time.
Sanven Technology Ltd.
Address: Suite 250, 9166 Anaheim Place, Rancho
Cucamonga, CA 91730
03