Operation - Cecotec Proclean 5010 Inox Bedienungsanleitung

3. OPERATION

Fig. 2
1. Power button
2. Express button
3. Cooking button
4. Defrost button
5. Timer button
6. Settings button
7. Start button
8. Pause/Cancel button
9. Time/weight knob
Before cooking
1. Connect the appliance to a power outlet. Once connected, the LED light will flash 3 times
and will show colon (:).
2. Enter the cooking function and the cooking time.
3. Cooking time and food weight can be increased or decreased during operation by turning
the Time/Weight knob. According to the operating mode, select time or weight.
Pause/Cancel
- Before operation: press the button once in order to reset settings and return to initial stage.
- During operation: press the button once in order to interrupt operation or press twice in
order to cancel the selected programme.
Reminder
Once the pre-set cooking process is over, END will appear on the LED display and the microwave
will beep 3 times. Press the Pause/Cancel button or open the microwave door in order to stop
the alarm, otherwise, the alarm will sound every 3 minutes.
Clock/timer setting
Press the Timer button and then turn the knob clockwise or anticlockwise to set the hour. When
the correct time is displayed, press the timer button again and turn the knob to set the minutes.
Once the correct minutes are displayed, wait 5 seconds, or press the timer button to confirm.
Example: setting clock at 12:30
Steps
1 After powering up, the display panel shows the colon sign.
2 Press the Timer button once.
PROCLEAN 5010 INOX / 5020 MIRROR
ENGLISH
Display
:
00:00
53