cecotec PROCLEAN 5110 RETRO COLORING TECH Bedienungsanleitung Seite 64

ENGLISH
2. BEFORE USE
- This appliance is packaged in a way as to protect it during transport. Take the appliance
out of its box and remove all packaging materials. You can keep the original box and
other packaging elements in a safe place to prevent damage to the appliance if you need
to transport it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
3. OPERATION
Before cooking
The LED flashes 3 times when plugged into the mains. The ":" symbol then flashes on the
display, prompting you to enter the cooking menu and time.
Self-cooking / Time-Weight Knob
You can increase or decrease the cooking time, weight or select the automatic cooking menu
during operation by turning the knob.
Pause/Cancel
In the initial or entry stage: press once to cancel the entry programmes and resume the initial
stage.
During cooking: press once to stop microwave operation, press twice to cancel cooking
programmes.
Auto reminder
When the preset cooking procedure has been completed, the display will show "END" and
three beeps will sound to prompt you to remove the food. If you do not press the Pause/Cancel
button once or do not open the door, a beep will sound at an interval of 3 minutes.
Instant cooking
In the standby state, press the Start button, the microwave will start cooking at high power;
the default cooking time of the system is 1 minute. You can increase or decrease the cooking
time by turning the knob.
Note: The instant cooking function applies to one of the following situations:
a. Activate the instant cooking function in 2 minutes when the microwave door is closed.
b. Activate the instant cooking function within 2 minutes by pressing Pause/Cancel.
64
PROCLEAN 5110 RETRO COLORING TECH