Parts And Components; Before Use - Cecotec Proclean 5010 Inox Bedienungsanleitung

ENGLISH

1. PARTS AND COMPONENTS

Fig. 1
1. Safety door-interlock system
2. Viewing window
3. Turntable shaft
4. Turntable ring assembly
5. Turntable
6. Control panel
7. Mica plate
NOTE:
The graphics in this manual are schematic representations and may not exactly match the
device.

2. BEFORE USE

- This appliance is packaged in a way as to protect it during transport. Take the appliance
out of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the appliance
when transporting it in the future. In case the original packaging is disposed of, make sure
all packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
- The appliance must be placed on a flat, stable, and dry place and kept away from corrosive
materials, heat, and humidity, such as gas burners or water.
- The appliance must be placed at least 5 m away from TVs, radios, or antennas.
- To avoid electric shock, the microwave must be installed in such a way that the plug is
accessible and that an effective earth connection is provided in the event of a current
leakage.
- Make sure to close the microwave door for proper operation.
- In case there are any manufacturing remains in the microwave cavity or on the heating
elements, leave the microwave open to ensure good ventilation. In such case, it is
recommended to heat a glass of water at high power for several times.
Warning
Do not try to remove the mica plate. This component is essential for the appliance to work
properly. The mica plate must be clean to ensure its proper operation.
52
PROCLEAN 5010 INOX / 5020 MIRROR