Maintenance Scheduling - Metasys Meta Air Einbau, Betrieb Und Wartung

14. Maintenance scheduling

Operation
Switch off the compressor at the end of
the use
Check that compressor operation does
not exceed max allowed duty cycle
Release condensate (versions without
dryer or automatic drain)
Suction filter check/replacement
Safety valve check
Periodical ordinary maintenance.
Check the cleaning (dust, paper or
leaves) and the air exchange of the
room for proper ventilation of the
compressor
Check the proper operation of the fans
Replacement of pre-dryer filter
cartridges (dryer versions)
Check tightness of joints, overall device
examination
Cleaning/check or replacement of the
non return valve pad
Check that the capacitor capacity
corresponds to the nominal value (±5%)
Periodical extra-ordinary maintenance.
Piston rings replacement for META Air
24/30
Periodical extra-ordinary maintenance.
Piston rings replacement for META Air
and META CAM from 150 to 1300
MAINTENANCE
Chapter
9.2
15.1
15.2
every 500 hours
15.3
15.4
15.4
Exploded views on
https://www.metasys
.com/download-
area/
Every 2 years/check
15.5
Exploded views on
https://www.metasys
.com/download-
area/
Exploded views on
https://www.metasys
.com/download-
years/1.500 hours
area/
Exploded views on
Every 3.000 hours
https://www.metasys
.com/download-
area/
26
Periodicity Performed by
Daily
Daily
Weekly
Yearly / Check User/Qualified
User/Qualified
Yearly
User/Qualified
Yearly / 1500
hours
Weekly
Weekly
User/Qualified
Yearly
Yearly Qualified technician
User/Qualified
every year
Every 2 years Qualified technician
Every 2
Qualified technician
Qualified technician
or 4 years
User
User
User
technician
technician
technician
User
User
technician
technician