In Order To Keep The Skin Smooth And Without Hairs, It's Recommended To Use; Packing List; Specification Parameters - Vevor T021K Bedienungsanleitung

The light exit window
filter is dirty
The device produces
Hairs were not properly
an odd smell
r e m o v e d b e f o r e t h e
t r e a t m e n t . T h e f l a s h
burns the hair causing
an odd smell.
The flash intensity is too
high.
The filter of the light exit
You feel pain when window is damaged.
using the device.
You are using the device
in a non-applicable area.
After using the
Mild redness is a normal
device, the treated
and harmless reaction to
area shows signs of
the hair removal.
redness.
The flash intensity used
is too low.
The treatment results
are not satisfactory.
The frequency is lower
than recommended.
Carefully clean the light
exit window filter with 70%
isopropyl alcohol wipe.
Before you start using the
device, remove all hairs from
the area you want to treat
with a razor blade or trimmer.
Verify the flash intensity and
reduce it
Please stop using the device
and contact your Fansizhe
local dealer for assistance.
Please read the instruction
m a n u a l , w a r n i n g s a n d
p r o h i b i t e d u s e a r e
mentioned.
Do not take any action, is a
normal reaction.
Next treatment, adjust the
flash intensity
In order to keep the skin
smooth and without hairs,
it's recommended to use
the device once every two
weeks. Treatment intervals
depend on each person hair
growth cycle, do not use the
device more than once every
two weeks Overusing the
device increases the risk of
adverse skin reactions.
25
Your skin tone and hair
The treatment results
color are not suitable to
are not satisfactory.
use with this device.
Other problems.
Note: If the device still does not work properly after using the above solutions,
please stop using the device and contact your local dealer.

10. Packing List

Main unit 1PCS
Instruction book 1PCS
Shaver 1PCS

11. Specification Parameters

Device Name Intense Pulsed Light (IPL) System
Model T021K
Dimension 73.2×81.1×202.2mm
Risk group Exempt Group
Irradiation area Light outlet: 3.0cm²
Adaptor Input 100-240 Va.c., 50/60Hz, 1.5 A
IPL main part input 24 Vd.c., 2.0 A
Wavelength 510 ~ 1200nm
Max. Fluence 4.8J/cm²
Pulse duration 4 ~ 12ms
Output energy 5.6J~14.5J
Service life 400,000 flashes
If your body hairs are blonde,
red, gray white, or if your
skin tone is very dark, do not
use this device.
Contact your local dealer.
Power adapto 1PCS
Safety goggles 1PCS
Storage bag 1PCS
26