Equipment With Accessories; Installation With 2X Cover Plate Modul 45; Installation With Two 1X Modul 45 Cover Plates - Obo Bettermann Ges R2 Montageanleitung

Installing/mounting the GES R2 floor socket
ATTENTION
34 | EN
11.5

Equipment with accessories

Risk of damage through wrong connectors/sockets!
Using 33° sockets and angular connectors may cause damage to the
installation socket!
Ideally use 0° sockets when mounting. Do not use straight connectors.
11.5.1

Installation with 2x cover plate Modul 45

See Fig.
1. Attach the sockets to the 2x Modul 45 cover plate.
2. Electrically connect the installation cable.
3. Insert the strain relief in the 2x Modul 45 cover plate.
4. Clamp the installation cable in the strain relief.
5. Engage the mounted 2x Modul 45 cover plate in the installation
socket.
11.5.2

Installation with two 1x Modul 45 cover plates

See Fig.
Note! Two 1x Modul 45 cover plates are used when one data socket and
one socket are to be mounted. The connection compartments must
be safely electrically separated with a partition. The base of the
installation socket can be removed in the area of the data cable.
:
:
OBO Bettermann