Installing/Mounting The Ges R2 Floor Socket; Required Tools; Preconditions; Basic Working Method - Obo Bettermann Ges R2 Montageanleitung

Installing/mounting the GES R2 floor socket
WARNING
32 | EN
11 Installing/mounting the GES R2 floor socket
Danger to life from electrical current!
Contact with electrical current can lead to an electric shock.
Fatal or series injuries are possible.
Electrical work may only be carried by specialist personnel with electrical
training!
11.1

Required tools

– Battery-operated screwdriver or
– screwdriver
11.2

Preconditions

On the construction side, there must be a floor opening Ø 122 mm
with cable routing.
• Run the cables out of the floor opening.
11.3

Basic working method

OBO Bettermann recommends mounting and installation in the
following sequence:
1. Mounting of the installation socket
2. Installation of the cover plates
3. Mounting of the lid
OBO Bettermann