HOMCOM 820-046 Montageanweisungen Seite 4

3. This is how the leg looks when attached
correctly.
Heater Operation
The heater is operated via the use of three switches, the two switchs are on the right hand side of the
canopy, on the left hand side of the canopy is the thermostat. Please kindly check the below detail
instruction:
To adjust the permanent temperature:
1) Turn the thermostat clockwise to the biggest point.
2) When the room temperature goes up to be comfortable
then turn the switch in an anticlockwise to break point and
keep the button position.
3) The function can keep necessary room temperature and
also save energy.
Appliance Off
Appliance On with flame effect
Heater 1000W with flame effect
Heater Off/ Flame effect only
Heater 2000W with flame effect
4. This is how the fireplace heater will look
when all two legs are in place.