OPERATING
Charge 1-1 5 hours before use
2
When charging Fixe
the light turns white.
3.
Before use. make sure Fixe
with slight pressure until
the shaft stops inside the balL Turn clockwise until hall is secured in place. The ball
must be connected prior to operating the Fixe
4
To turn on, press the power button and lights come
start first level speed 1and press again to increase speed to second level speed 2
and then again to third level speed 3.
5
There is indicator Light around logo on the Fixe
on. The indicator will show red when batteru running lower than 25% of its capacitu
6
TOturn Off, press and hold power button down
7
To remove ball, turn Fixe
away from the shaft.
Use antibacterial
TROUBLESHOOTING
If
Mini will not pawer on, charge battery until fully charged
II ball will not remove from shaft. turn counterclockwise
If batteru will not charge, check connections of power cord connected to Fixe
or wall plug in power outlet
INSTRUCTIONS
Mini a red light illuminates. Once the batteru is fully charged,
Mini is off Then, place the ball on to the metal shaft
Min. off and turn ball counterclockwise
or alcohol wipes to clean ball between uses
Mini
Press power button again to
Mini top showing white for power
and pull ball
to remove.
EN
Mini
5