Bluetooth; Multi-Function Button - Nacon Rig 600 Pro Hx Bedienungsanleitung

• Bluetooth:

To pair your headset with a Bluetooth device, make sure your headset
power is on.
- Press and hold the Mode button for more than 6s until to hear
the Prompt voice: "Pairing Bluetooth". Headset LED will be
flashing Blue during pairing process.
- Open the `Settings' menu on your mobile device, go to
Bluetooth and turn ON the Bluetooth connection. Look for RIG
600 PRO, in the list of devices, and select it.
If pairing is successful, you will see the message on your device but
will also hear a prompt voice, through the headset:
- "Bluetooth connected" in Dual mode,
- "Connected" in Bluetooth mode.
If Bluetooth pairing is unsuccessful, you will hear the prompt voice:
"Bluetooth Pairing Failed".
In this case, turn off your device's Bluetooth connection, and power
off the headset, and repeat the pairing process again making sure the
above conditions are followed.
WARNING: when in Dual mode you are paired to two devices (USB-C
Dongle and a Bluetooth device) but note the USB-C Dongle has the
priority over the Bluetooth.
If you answer an incoming call, for instance, the communication with the
USB-C Dongle will stop and the incoming call will be heard.
When the call is complete, the headset will automatically switch back to
the USB-C Dongle.
I

Multi-function button

With this button you can, with a single press:
• Play/Pause music or other audio/video apps,
• Answer an incoming call when your Bluetooth connection is
activated,
• On Xbox models, temporarily switch the the volume dial to
game/chat balance. To go back to the volume control, short
press again or do not touch the wheel for five seconds.
Your headset remembers the latest Bluetooth device connected
so once you have set-up your device it will remember it even if you
switch between modes or power on/off your headset.
With this button you can with, a long press (6s).
• Activate your mobile device's voice assistant, when connected
to Bluetooth,
• Reject a call.
EN /
9