How To Pair Your Headset; Usb-C Dongle - Nacon Rig 600 Pro Hx Bedienungsanleitung

EN /
I

How to pair your headset?

• USB-C Dongle:

The Headset & USB-C Dongle are already paired out of the box.
If you need to do a new pairing, for any reason, make sure:
- The USB-C wireless dongle is connected to your console or PC,
- Turn off the Headset.
Press and hold the On/Off button for more than 6s until to hear the
Prompt voice: "Pairing USB". The Headset LED will be flashing Purple
during the pairing process.
When pairing is successful you will hear the prompt voice:
- "Connected" in USB mode
- "USB connected" in Dual mode
If pairing is unsuccessful, you will hear the prompt voice: "USB Pairing
Failed".
In this case repeat the pairing process again making sure the above
conditions are followed.
8
Mode button
Multifonction button
Volume control
Light indicator
On/Off button
USB-C