Retevis RT71 Bedienungsanleitung Seite 5

RETC/15
afety and Overview
Product safety and RF Exposure for handheld two way radio
Before using this two way radio ,please read the manual which contains
important operating instructions
control information and operational
Energy Exposure limits in applicable
Also read the operational
Overv
witch oniew
lockwise to turn on the radio volume knob, there will be a "KADA" sound, message soun
nd the screen will show up "Welcome", while the LED indicator lights up and becomes
reen color if the battery is full charged
Notice: if all LED indicators are forbidden, the screen will not light up when switch on the
walkie talkie, but with a message sound
Notice: if the Tones/Alerts is forbidden, there will not any sound when power on. Here,
need to power off the walkie talkie and anticlockwise
sound
djust Volume
lockwise the volume knob to higher the volume or anticlockwise
hows a volume line on the screen
041
for safe usage,RF Energy Awareness,
instructions for compliance with RF
national and international standards
instructions for safe use.
with the knob until a "KADA"
to lower: And there
Launch and receive calls
one selection
one is a channel group, Each radio can set 16 zones and each zone with max 1024
hannels
Menu function:
I . Press [Menu] key to enter the menu
Press [ or ] key to choose, after that with Menu key to confirm
Screen shows the chosen zone and name by it
or ] key to chose, after that with Menu key to confirm.
Screen shows the chosen zone and name by it
Selection of channels
elect the needed zone (if there are more than one zone), using the channel knob to
elect the channel
Receive and reply group call
he radio must be under a group, then can receive the group call
hen received the group call:
LED indicator is green color.
On the top of the radio, will show RSSI mark, First line will show the ID, Second line
show the group call Icon
3. Hold the radio and place it between your lip within 2.5-3cm
Press [PTT] key to answer the call, LED indicator light change to be red color.
Release [PTT] key to receive next call
. If there are not any voice activity, the call end
Receive and reply the single call
ingle call means one on one call, Only with two types: one is testing presence of radio
before call, and another is call immediately.
hen receive the single call:
1. LED indicator is green color.
On the top of the screen will show RSSI mark, First line will show the ID, Second line
show the group call Icon
Hold the radio and place it between your lip within 2.5-3cm
Press [PTT] key to answer the call, LED indicator light change to be red color.
Release [PTT] key to receive next call.
1 05