Adey MagnaCleanse 2 Bedienungsanleitung Seite 7

Fill and Vent all radiators
10
Boiler OFF
12
2
Using the in-line drain valve supplied,
13
drain down the system. Taking care
that all zone valves are in the mid/ open
position to enable complete drain down
of cleaning chemicals
3
Cold Flush
To fully remove any remaining chemicals or debris a cold flush must be undertaken.
Isolate filter valves appropriately,
1
depending on the location of the filling
loop.
KEY PRODUCT CHARACTERISTICS
Isolate all radiators and starting with
2
DIMENSIONS CRITICAL TO QUALITY OR SAFETY (CTQ/CTS)
NOTES / FEATURES / MATERIAL / PROCESSES CTQ/CTS
one furthest away from the boiler, open
ADEY INNOVATION LTD.
the cold feed to flush the system using
UNIT 2, ST MODWEN PARK
HARESFIELD
STONEHOUSE
GL10 3EZ
the filling loop. *Take care not to over
CHECKED THIS DRAWING REMAINS THE PROPERTY OF ADEY INNOVATION LTD. AND MUST NOT BE COPIED OR
PASSED TO A THIRD PARTY WITHOUT PERMISSION. TEL: +44 (0)1452 340 400 Email: info@adey.com
pressure the system to avoid activation
of the pressure release valve
MATERIAL
N/A
FINISH
N/A
WEIGHT
10.198 grams (est.)
3
A
4
B
C
D
E
F
MATERIAL
FINISH
WEIGHT
TOLERANCES & DIMENSIONS IN mm UNLESS OTHERWISE STATED
0 - ±0.5
0.XX - ±0.1
Allow to circulate for a further 15-20
11
mins to allow distribution of chemicals
1
4
5
REV DRAWN DATE ECR No. CHECKED
BYPASS
VALVE
Open each radiator in turn to complete
3
a cold flush. Continue this process until
N/A
the drain hose runs clear before moving
N/A
on to the next radiator.
10.187 grams (est.)
A3
0.X - ±0.2 SIZE
ANGULAR ±0.1°
2 3
5
6
KEY PRODUCT CHARACTERISTICS
DIMENSIONS CRITICAL TO QUALITY OR SAFETY (CTQ/CTS)
NOTES / FEATURES / MATERIAL / PROCESSES CTQ/CTS
ADEY INNOVATION LTD.
UNIT 2, ST MODWEN PARK
HARESFIELD
STONEHOUSE
GL10 3EZ
THIS DRAWING REMAINS THE PROPERTY OF ADEY INNOVATION LTD. AND MUST NOT BE COPIED OR
OFF
PASSED TO A THIRD PARTY WITHOUT PERMISSION. TEL: +44 (0)1452 340 400 Email: info@adey.com
TOLERANCES & DIMENSIONS IN mm UNLESS OTHERWISE STATED
0 - ±0.5 0.X - ±0.2
0.XX - ±0.1 ANGULAR ±0.1°
DESCRIPTION
KIT OF PARTS - MAGNACLEANSE
1 of 1
SHEET
NTS
SCALE
4
6
7
MATERIAL
N/A
FINISH
N/A
WEIGHT
10.187 grams (est.)
FILLING FILLING
LOOP LOOP
A3 1 of 1
SIZE SHEET
NTS
SCALE
VE
5
8
MA
TOLERANCES & DIMENS
0 - ±0.5 0.X
0.XX - ±0.1 ANGUL
DESCRIPTION
KIT OF PAR
DRG NO.
CP1-02-06
VIBRAC