Mounting Instructions; Wiring Instructions - Caliber Csm-Rgb Control Bedienungsanleitung

Mounting instructions
The CSM-RGB
location as dry as possible using the mounting points on the device.
Wiring instructions
The CSM-RGB
you need to connect the RGB outputs (6) of this device to the
Caliber CSM LED speakers. For further instructions,
provided manual Ofthe speakers.
Power
Connect the red wire (4) to a switched +12V (e.g. ACC) and the black
wire (2) to ground (-12V). The blue wire needs to receive a +12V signal
when your audio system is active, so connect this wire e.g. the +12V
remote/antenna
Connecting by Bluetooth
• Turn the CSM-RGB
(It will try to re-connect
• Use the app to connect automatically.
"EZ LED" for free, in the Google Play Store or in the Apple App Store.
See backside manual
• When successfully
flashing and turn solid.
• Use the app on your device to set the color, brightness
movement Of the speaker LEDs.
Note: there can only be one device connected to the CSM-RGB Control
at the same time.
Control is splash proof, but best is to mount it on a
Control is a Bluetooth
output of your head unit.
Control ON.
with the last connected device first).
for the QR codes.
connected,
receiver. To
You can download the app
the blue LED indicator will stop
BER
set the LEDs
see the
and