Mounting Precautions - Sharp Multisync Ea242W Bedienungsanleitung

• When moving the monitor, be sure to hold its sides or bottom. Do not hold the LCD panel or
buttons. This may cause product damage, failure, or injury.
• To attach a VESA-compliant mounting bracket, use M4 screws that are 6 mm to 10 mm longer than
the thickness of the mounting bracket.
6 - 10 mm
• Be sure to use a wall-mount bracket designed or designated for mounting the monitor.
• This monitor and bracket must be installed on a wall which can endure at least 4 times or more the
weight of the monitor.
Install by the most suitable method for the material and the structure.
• Do not use an impact driver.
• Do not use any screw holes other than those for mounting brackets, located on the rear of the
monitor, for installation.
• When installing, check the tilt angle in the Product Specifications.
• After mounting, please carefully ensure the monitor is secure, and not able to come loose from the
wall or mount.

Mounting precautions

Screws (M4)
Mounting bracket
Monitor mounting
Screw holes for mounting brackets
100 mm
9
≦ 5°
English-9
> 5°