STOP&GO ROOFTOP Bedienungsanleitung Seite 29

Fig. 2 Ideal position (left) of the marten repellent in the attic
Use in an attic
Procedure:
1. Position the marten repellent to allow the ultrasonic waves to
spread ideally in every direction.
2. Switch on the marten repellent.
» The marten repellent is in Standby operating mode.
3. Press the button on the remote control twice to activate Attic
operating mode.
» The status LED lights up once and two short beeps sound.
» Ultrasonic waves are emitted and the fl ashing LED lights are
active.
EN
29