Using The Marten Repellent On A Vehicle - Stop&Go Rooftop Bedienungsanleitung

4.2 Using the marten repellent on a vehicle

Instructions for use
– Make sure that the roof of the vehicle on which the marten repel-
lent is placed is clean. Failure to do so may result in damage to
the paintwork.
– To change the position of the marten repellent, always pick up the
entire device to avoid damage to the paintwork.
– Make sure to use the wire rope in such a way that no damage to
the paintwork occurs. Be aware that it retracts automatically.
– The alarm function is activated in Vehicle operating mode. When
the marten repellent is picked up and the pressure switch is no
longer under load, an alarm sounds for 30 seconds. The button
on the remote control can be used to stop the alarm sound. The
marten repellent then switches to Standby operating mode.
26