Using The Marten Repellent In An Attic - Stop&Go Rooftop Bedienungsanleitung

4.3 Using the marten repellent in an attic

Instructions for use
– Ensure that the marten repellent is positioned at an equal dis-
tance from all sides to allow the ultrasonic waves to spread
evenly. A higher position can improve the effect. In particularly
large attics, position the marten repellent in front of potential entry
holes. The marten repellent should be placed at a maximum dis-
tance of 4 metres in every direction.
– The flashing LED lights are activated in Attic operating mode. The
flashing LEDs light up approx. every 6 seconds.
28