4
Operation
4.1 Battery and status LED
When fully charged, the marten repellent can be operated for
approx. 2 months. The status LED indicates the charge status of the
battery. It lights up briefly when switched on.
Charging states
Green
Yellow
Red
Instructions for charging the battery
– Fully charge the battery before using it for the first time.
– Use the USB charging cable provided.
– Only charge the marten repellent with a USB charger. Make sure
that the maximum charging voltage of 4.2 V and the maximum
charging current of 1000 mA are not exceeded. Fast chargers
can destroy the marten repellent and cause an explosion.
– The ambient temperature during charging must be between
and 60 °C.
24
Between 100% and 70%
Between 70% and 20%
Below 20%
Fully functional
Fully functional, recharge soon
Limited functionality, must be
recharged
10
–