Charging The Battery - Stop&Go Rooftop Bedienungsanleitung

Charging the battery

The marten repellent must be switched off to charge the battery. It
can take up to 7 hours to fully charge the battery. Do not keep the
marten repellent connected to the charger for more than 24 hours.
Procedure:
1. Open the charging socket cover.
2. Plug the USB charging cable into the charging socket.
» All LEDs light up briefly and a beep sounds.
3. Connect the USB charging cable to the charger.
» The status LED flashes while the battery is charging.
4. Disconnect the charger when the status LED has stopped flash-
ing.
» The battery is fully charged.
EN
25