HIKMICRO Mini3R Schnellstartanleitung Seite 9

English
About this Manual
The Manual includes instructions for using and managing the Product. Pictures,
charts, images and all other information hereinafter are for description and
explanation only. The information contained in the Manual is subject to change,
without notice, due to firmware updates or other reasons. Please find the latest
version of this Manual at the HIKMICRO website (www.hikmicrotech.com).
Please use this Manual with the guidance and assistance of professionals trained in
supporting the Product.
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to
avoid danger or property loss.
Laws and Regulations
Use of the product must be in strict compliance with the local electrical safety
regulations.
Technical Support
https://www.hikmicrotech.com/en/contact-us.html portal will help you as a
HIKMICRO customer to get the most out of your HIKMICRO products. The portal
gives you access to our support team, software and documentation, service
contacts, etc.
Maintenance
● If the product does not work properly, please contact your dealer or the nearest
service center. We shall not assume any responsibility for problems caused by
unauthorized repair or maintenance.
Wipe the device gently with a clean cloth and a small quantity of ethanol, if
●
necessary.
● If the equipment is used in a manner not specified by the manufacturer, the
protection provided by the device may be impaired.
Using Environment
● Make sure the running environment meets the requirement of the device. The
operating temperature shall be -20 °C to 50 °C (4 °F to 122 °F), and humidity shall be
95% or less. If the operating temperature is -20 °C to -10 °C, the temperature
measurement accuracy of the device may decrease.
● Place the device in a dry and well-ventilated environment.
● DO NOT expose the device to high electromagnetic radiation or dusty
environments.
● DO NOT aim the lens at the sun or any other bright light.
● When any laser equipment is in use, make sure that the device lens is not exposed
to the laser beam, or it may burn out.
● The level of protection is IP 54.
Transportation
● Keep the device in original or similar packaging while transporting it.
● Keep all wrappers after unpacking them for future use. In case of any failure
occurred, you need to return the device to the factory with the original wrapper.
Transportation without the original wrapper may result in damage on the device and
the company shall not take any responsibilities.
● Do not drop the product or subject it to physical shock. Keep the device away from
magnetic interference.
Emergency
● If smoke, odor, or noise arises from the device, immediately turn off the power,
unplug the power cable, and contact the service center.