Changing The Master Code - Rottner Kyde Bedienungsanleitung

GB
USERMANUAL
ENGLISH
(The master code you have chosen will remain the same when you change the battery receive)
a. Open the door with the key.
b. Briefly press the "0" key on the keypad
twice.
c. Briefly press the changeover button (1).
d. An acoustic signal sounds and the yel-
low LED lights up.
e. Enter the current master code (delivery
default is 1 – 5 – 9 – 1).
f. Press the "A" button to confirm.
g. Enter the master code you have cho-
sen (min. 4, max. 8 digits).
h. Press the "A" button to confirm.
If a four-fold acoustic signal sounds during the programming process and the yellow
LED lights up four times, the programming process has been aborted - start the pro-
gramming process again from point b.
ATTENTION Check several times that the master code you have chosen is working
correctly.
7. ASSIGN A GUEST CODE TO A COMPARTMENT
(The guest code you have chosen will remain the same when the battery is changed
receive)
Example compartment no. 1:
The first digit when assigning a code is the corresponding compartment number
(Only one number from 1 to 6 can be selected)
a. Briefly press the changeover button (1).
b. An acoustic signal sounds and the yel-
low LED lights up.
c. Enter the current master code (delivery
default is 1 – 5 – 9 – 1).
d. Press the "A" button to confirm.
e. Enter the compartment number and
the selected guest code (min. 4, max.

6. CHANGING THE MASTER CODE

i. The green LED flashes twice and a
double signal sounds.
j. Re-enter the master code you chose
(min. 4, max. 8 digits).
k. Press the "A" button to confirm.
l. The green LED flashes twice and a
double signal sounds.
m. The master code you selected has
been saved successfully
6 digits). e.g.: 1 (compartment number)
1 – 2 – 3 – 4 – 5 – 6 (guest code)
f. Press the "A" button to confirm.
g. The green LED flashes twice and a
double signal sounds.
www.rottner-tresor.com