Changing The Master Code - Rottner Kyde Bedienungsanleitung

(The master code you have chosen will remain the same when you change the battery receive)
a. Open the door with the key.
b. Briefly press the "0" key on the keypad twice.
c. Briefly press the changeover button (1).
d. An acoustic signal sounds and the yellow LED lights up.
e. Enter the current master code (delivery default is 1 – 5 – 9 – 1).
f. Press the "A" button to confirm.
g. Enter the master code you have chosen (min. 4, max. 8 digits).
h. Press the "A" button to confirm.
i. The green LED flashes twice and a double signal sounds.
j. Re-enter the master code you chose (min. 4, max. 8 digits).
k. Press the "A" button to confirm.
l. The green LED flashes twice and a double signal sounds.
m. The master code you selected has been saved successfully
If a four-fold acoustic signal sounds during the programming process and the yellow LED lights
up four times, the programming process has been aborted - start the programming process
again from point b.
ATTENTION Check several times that the master code you have chosen is working correctly.
(The guest code you have chosen will remain the same when the battery is changed
Example compartment no. 1
The first digit when assigning a code is the corresponding compartment number
(Only one number from 1 to 6 can be selected)
a. Briefly press the changeover button (1).
b. An acoustic signal sounds and the yellow LED lights up.
c. Enter the current master code (delivery default is 1 – 5 – 9 – 1).
d. Press the "A" button to confirm.
e. Enter the compartment number and the selected guest code (min. 4, max. 6 digits).
e.g.: 1 (compartment number) 1 – 2 – 3 – 4 – 5 – 6 (guest code)
f. Press the "A" button to confirm.
g. The green LED flashes twice and a double signal sounds.
If a four-fold acoustic signal sounds during the programming process and the yellow LED lights up
four times, the programming process has been aborted - start the programming process again from
point a.
ATTENTION Check that the guest code you have chosen is working correctly.
Example compartment no. 2
The first digit when assigning a code is the corresponding compartment number
(Only one number from 1 to 6 can be selected)
a. Briefly press the changeover button (1).
b. An acoustic signal sounds and the yellow LED lights up.
c. Enter the current master code (delivery default is 1 – 5 – 9 – 1).
d. Press the "A" button to confirm.

6. CHANGING THE MASTER CODE

7. ASSIGN A GUEST CODE TO A COMPARTMENT