Sharp BK-ED06E Bedienungsanleitung Seite 7

__________________________________________________________________________________
To check the correct saddle height, sit with your legs stretched out, heel resting on the pedal (fig. B).
When pedalling, the knee will be slightly bent with the foot in the low position (fig. A).
Handlebars and stem
Your bike is fitted with a handlebar stem.
To adjust the angle of the handlebars, operate the lever on the
side of the stem by pulling it in the direction indicated on the
lever itself so that the valve on the stem opens.
This allows you to adjust the position of the steering wheel and
the angle of the style.
Close the cover to secure the chosen settings.
The inner screw is used to adjust the tension of the seatpost on
the handlebar.
Make sure the handlebars are perpendicular to the front wheel.
The bike is fitted with a stem; the height of the
stem is adjusted by changing the position of the
stem in the centre tube of the frame.
To adjust the height of the stem, loosen the
clamping screw and raise the stem to the desired
height.
Caution:
Do not exceed the minimum insertion reference point. This reference point must never be visible
when cycling.
Retighten the screw on the stem and check that the position of the force is correct.
7