Sharp BK-ED06E Bedienungsanleitung Seite 28

__________________________________________________________________________________
it's too much
The tension
total from the
"42"
it's too much
The power total
from the cells
"43"
from the
battery is too
much high.
The tension
from the single
"44"
too high.
temperature
from the
"45"
battery is
too high.
temperature
from the
"46"
battery is
The SOC of
"47" battery is too
The SOC of
"48" battery is too
Detection fault
"61" from the
switching.
high.
Recharge the battery. If the problem persists
drums
replace the battery.
low.
Replace the battery.
Replace the battery.
cell is
The
Let the pedelec cool down.
If the problem persists, replace the battery.
The
Bring the battery up to temperature environment. If
the problem persists, replace the battery.
too low.
Replace the battery.
high.
Replace the battery.
low.
1. Check that the gear lever is not blocked.
2. Replace the gear lever.
28