Snooze Function; Display Light; Mains Operation; Cleaning - ADE WS 1602 Bedlenungsanleitung

Snooze function

− Press the round button on the rear side or the
LIGHT/SNZ button when the alarm signal sounds.
The alarm signal goes silent after the snooze time set
by you. Then the device switches back on and the alarm
sounds again. This procedure can be repeated multiple
times.
If the snooze function is activated, "z
the display.

Display light

Battery operation
− Press the round button on the rear side or the LIGHT/
SNZ button to switch on the display light of the base
station for approx. 15 seconds.

Mains operation

If you operate the base station using the mains adaptor
over the mains supply, the display is permanently lit.

Cleaning

1. During operation via the mains: Pull the mains adaptor
plug out of the base station.
2. As necessary, wipe the base station and the outdoor
sensor clean with a lightly-dampened cloth.
3. Dry the device completely before you reconnect it with
the mains adaptor.
60
Weather Station with Wireless Outdoor Sensor WS 1602/1603
" will be shown on
Z