Setting The Time And Date Manually - ADE WS 1602 Bedlenungsanleitung

‚ You can start the receiving process again manually,
see "Starting signal reception manually", or
‚ Wait until the base station automatically switches
to receiving mode again at a later point in time. The
reception is usually better at night.
‚ If reception is not possible at your location, you can
set the time and date manually, see next chapter.

Setting the time and date manually

If there is more than approx. 7 seconds between
two pushes of a button, the setting process
automatically ends and you will have to repeat it.
1. Press and hold the MODE button until the year
indicator on the display blinks.
2. Using the buttons
3. Stellen Sie mit den Tasten
4. Press MODE to save the setting. The month blinks on
the display.
5. Proceed as previously described.
6. Press MODE each time to save the settings.
7. Press the
8. Carry out the following settings:
− Day
− Date format
− Language (relates exclusively to the weekday
indicator)
Weather Station with Wireless Outdoor Sensor WS 1602/1603
and
or button to set the desired value.
set the current year.
das aktuelle Jahr ein.
51