Starting Signal Reception Manually - ADE WS 1602 Bedlenungsanleitung

− Time zone in which you are located (for most
countries in Europe, 00 is the correct setting for the
time zone).)
− Time format („24 Hr" or „12 Hr")
− Hours
− Minutes
9. Finally, press MODE to conclude the procedure.

Starting signal reception manually

If the radio signal symbol to the left is no longer
displayed, the radio signals from the time signal
transmitter are no longer being received. The time
indicator nevertheless continues precisely.
− Press and hold the WAVE button until the radio signal
symbol is displayed again.
The signal reception is thus started manually.
Pay attention to the following:
‚ If the reception was not successful, the reception
symbol fades out after a few minutes and the time on
the display continues normally.
‚ Upon successful signal reception, the radio-controlled
alarm clock adjusts itself to the time of the time signal
transmitter. If you have already carried out manual
time and date settings, these will be automatically
adjusted.
52
Weather Station with Wireless Outdoor Sensor WS 1602/1603