DUROFIX RC1222 Produktinformationen Seite 9

Battery Pack Model Number
BATTERY POWER INDICATOR
Trigger the tool and Battery Indicator to show
the battery pack's remaining capacity
1. One light ON: 30% remaining capacity.
2. Two lights ON: 60% remaining capacity.
3. All lights ON: 100% remaining capacity.
WARNING
instructions, read the operator's manual supplied with your charger and battery.
WARNING
accessories specifically recommended for this tool. Others may be hazardous.
INSTALLING OR REMOVING BATTERY PACK
A
B
TO REMOVE BATTERY PACK: Depress the battery release button (C) and pull
battery pack (B) out of tool (A). (see Fig. 2)
TO INSTALL BATTERY PACK: Push battery pack (B) onto tool until it locks in
place. (see Fig. 2)
INSTALLING AND REMOVING CUT-OFF WHEEL
Press and hold spindle lock (F), loosen bolt (A) clockwise, take off top flange (B), then
place wheel (C) onto bottom flange (D) and spindle (E). Place top flange back onto the
wheel and tighten the bolt.
1English1
Input Power
Type
ASSEMBLY
Recharge only with the charger specified for the battery. For specific charging
Always remove battery pack before changing or removing accessories. Only use
English
B1225LA / 1225LA-2
Fig. 2
-8
30W
Li-ion
C