Next Level Racing FGT PRO Bedienungsanleitung Seite 6

support@nextlevelracing.com
RIGHT-HAND KEYBOARD ASSEMBLY
A)
01
A) Remove Nyloc Nuts shown from underside of F-GT Pro mid-frame connection.
B) Align the Mounting Bracket with the existing Bolts on the mid-frame connection. Reinstall Nyloc Nuts.
A)
02
A) Align the Cockpit Mounting Arm with the holes on the Mounting Bracket.
B) Bolt through Mounting Bracket and Cockpit Mounting Arm using M8 Bolts, Washers, and Nyloc Nuts.
A)
03
A) Align the Tray Mounting Arm with the holes on the Cockpit Mounting Arm.
B) Place Barrel Spacer inbetween interlocked arms. Bolt through using M8 Bolt, Washer, and Nyloc Nut.
B)
B)
B)
6
PARTS:
• • 1 x Mounting Bracket
MOUNTING LOCATION
PARTS:
• • 1 x Cockpit Mounting Arm
• • 2 x M8 70mm Button Head Bolts
• • 2 x M8 Washers
• • 2 x M8 Nyloc Nuts
PARTS:
• • 1 x Tray Mounting Arm
• • 1 x Barrel Spacer
• • 1 x M8 75mm Button Head Bolt
• • 1 x M8 Washer
• • 1 x M8 Nyloc Nut