Cleaning & Maintenance - Jumbo Ayce Rta 25 Kit Bersetzung Der Originalbetriebsanleitung

The grass trimmer motor can rotary vertical direction for 48° by press below bottom on
both side.
It can also rotary the shaft for 180°by press below bottom 2 to be edger function.
Move the mowing machine evenly from oneside to another.
• If possible, mow by using the left half of the mowing machine. The mowed parts of
plants and / or stones will thus be hurled forward away from the operating person.
• The best possible cutting result are achieved when you hold the trimmer with an angle
of 20°- 30° to the left side.
• Avoid contact between the mowing string and obstacles such as fences, walls, stones,
etc. This leads to excessive wear and tear.
CLEANING/MAINTENANCE
Have repair and maintenance work, which is not described in this operating manual,
carried out by our service centre. Only ever use original parts.
Take the replaceable battery from the appliance before any extension, cleaning and
servicing works. Wait until all rotating parts have stopped and the appliance has cooled
down.
Keep the device, in particular the air vents, clean at all times. Never spray water on the
device body! Never clean the machine and its components with solvents, flammable or
toxic liquids. Us only a damp cloth making.
Use only original accessories and original spare parts.
Using other spare parts can result in accidents/injuries of the user. The manufacturer
48°
will not be liable for any such damage.
Please contact our service department if you need accessories or spare parts.
Only a regularly maintained and treated appliance can serve as a satisfactory aid.
Insufficient maintenance and care can lead to unforeseen accidents and injuries.
Repairs and works specified in these Instructions may only be performed by qualified
authorized staff.
STORAGE
Note
- Store the device in a dry and frost-free (10-25 °C) place.
- Store the battery and the device separately from each other.
- Charge the battery before storing it for the winter.
- Keep the device, and its plastic components in particular, away from brake fluid, petrol,
products containing oil, penetrating oil etc. They contain chemical substances that may
damage or destroy the plastic parts of the device.
- Fertilisers and other garden chemicals contain substances which can have a heavily
corrosive effect on metal parts. Do not store the device close to these substances.
- When transporting or storing the device, always cover the cutting unit with the cutting
unit protector (10).
Disposal and recycling
The equipment is supplied in packaging to prevent it from being damaged in transit. The
raw materials in this packaging can be reused or recycled. The equipment and its
accessories are made of various types of material, such as metal and plastic. Defective
components must be disposed of as special waste. Ask your dealer or your local council.
Old devices must not be disposed of with house-hold waste!
This symbol indicates that this product must not be disposed of together with
domestic waste in compliance with the Directive
(2012/19/EU) pertaining to waste electrical and electronic equipment (WEEE).
This product must be disposed of at a designated collection point. This can occur,
for example, by handing it in at an authorized collecting point for the recycling of waste
electrical and electronic equipment. Improper handling of waste equipment may have
negative consequences for the environment and human health due to potentially
hazardous substances that are often contained in electrical and electronic equipment. By
properly disposing of this product, you are also contributing to the effective use of
natural resources. You can obtain information on collection points for waste equipment
98| 99 GB