Technical Specification - Jumbo Ayce Rta 25 Kit Bersetzung Der Originalbetriebsanleitung

TECHNICAL SPECIFICATION

Product name
Model
Motor
Rated voltage
Blade
Cutting dia.
Net weight
Sound pressure level LpA
Sound Power LwA
Uncertainty KwA
Sound power level
LwA(guranteed)
Vibration ah
K uncertainty
Suggested battery
Suggested charger
Battery Charger JLH482102000G
Input voltage 220 - 240 V
Frequency 50 - 60 Hz
Output voltage 21VDC
Output current 2 A
Input power 60 W
Recommended battery types LBC202Z-1
Remarks: The grass trimmer should exclusively use the battery and charger
suggested above. Other type battery and charger are never allowed
20V brushed grass trimmer
LTC20S
A spazzole
18VDC (Max. 20VDC)
Plastic
250 mm
2.2 kg
76 dB(A)
89.4 dB(A)
3 dB(A)
94 dB(A)
＜2.0 m/s²
1,5 m/s²
LBC202Z-1
JLH482102000G
LBC202Z-1
Battery voltage 20 VDC
Battery capacity (Li-Ion) 2.0 Ah
Battery power 40 Wh
JLH482102000G
Recommended chargers
Noise details
Measured according to 1) EN 50636-2-91; 2) 2000/14/ EG; Uncertainty K = 3 dB (A)
Vibration details
Total vibration values (triaxial vector sum) Determined properly EN 50636-2-91,
Uncertainty K = 1,5 m/s2
Technical changes reserved.
WARNING ! The declared vibration emission level represents the main applications of the
tool. However if the tool is used for different applications, with different accessories or
poorly maintained, the vibration emission may differ. This may significantly increase the
exposure level over the total working period.
The vibration emission level will vary because of the ways in which a power tool can be
used and may increase above the level given in this information sheet.
The vibration emission level may be used to compare one tool with another. It may be
used for a preliminary assessment of exposure. An accurate estimate of the vibratory
load should also take into account the times when the tool is shut down or when it is
running but not actually in use. This may significantly reduce the vibratory load over the
total working period.
Identify additional safety measures to protect the operator from the effects of vibration
such as maintain the tool and the accessories, keep the hands warm, organization of
work patterns.
Wear high-quality safety gloves
Wear ear-muffs.
The impact of noise can cause damage to hearing. Reduce noise generation and vibration
to a minimum!
-Use only equipment that is in perfect condition.
-Maintain and clean the equipment regularly.
-Adopt your way of working to the equipment.
-Do not overload the equipment.
-Have the equipment checked if necessary.
-Switch off the equipment when not in use.
-Wear gloves .
88| 89 GB