Herunterladen Inhalt Inhalt Diese Seite drucken

Technical Data; Installation Instructions - Plamen Laguna Technische Anleitung

Gusseisenofen mit nische
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 10
LAGUNA is a product designed in accordance with current trends, featuring clean simple lines
that fit into any ambient style. The stove is made of high quality cast iron, painted with heat
resistant black paint giving a visually enhanced appearance to the product as a whole.
Large glazed door offers the view of the entire firebox and full experience of the open fire.
Thanks to a specific design of primary and secondary air supply, the glass remains clean
throughout the heating time. The stove is designed with a drawer at the bottom where a limited
quantity of fuel and stove accessories may be kept. The upper part is designed with a „niche" for
better heating efficiency, but it may also be used for food reheating.
long-lasting ember bed and the fire needs not be extinguished for several days.
Please READ CAREFULLY THESE INSTRUCTIONS in order to achieve the best performance
at the very first use of the stove.
The stove meets all relevant EN 13 240 requirements and has a CE marking affixed to it.

TECHNICAL DATA:

MEASUREMENTS: W x H x D
WEIGHT:
RATED OUTPUT:
FLUE OUTLET: top
SPACE HEATING CAPACITY:
FUEL:

INSTALLATION INSTRUCTIONS

Place the pan cover (111) into the firebox. The stove is delivered complete with a top mounted flue
connection.
A spring may be installed on the lower hinge of the stove door to make sure that the door will not
remain open, except when firing or refuelling. This makes it possible to connect more than one
appliance to a single chimney and, in case of a chimney of inadequate design and/or in poor
maintenance condition, prevents the smoke from spreading into the room.
To install the spring, proceed as follows:
Figure 1
- Open the door, remove the bolt from the lower hinge, remove the door and insert the pin with the
spring in prestressed position (see Figure 1). Reinsert the door on the upper bolt, insert the longer end
of the spring into the hole on the front frame and install the pin in the lower eye on the front frame
(103).
50x122,6x54 cm
133 kg
8 kW
Ø150 mm
3
up to 180 m
wood, wood briquettes
17
The stove design ensures

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis