HOMCOM 820-411V90 Bedienungsanleitung Seite 21

WEEKLY TIMER SETTING OPERATION
1. Press the "Weekly Timer" button to start the weekly timer setting. The display will show
'0', which means no timer has been set yet. lf there is already a number displayed, it
means the timer has been set previously.
2. Press the "Weekly Timer" button a second time until the last digit starts flashing. The
display will show '1d', which means the weekly timer starts today. You can also set it to
start from the second day (2d), third day (3d), fourth day (4d), fifth day (5d), sixth day
(6d)or seventh day(7d).
3. Press the "Weekly Timer" button a third time to set the starting working hours. Use the
'+' and '-' buttons to adjust the hour between 0-23.
4. Press the "Weekly Timer" button a fourth time to set the power-off working hours. Use
the '+' and '-' buttons to adjust the hour between 0-23.
5. Press the "Weekly Timer" button a fifth time to set the desired temperature. Use the'+'
and '-' buttons to adjust the temperature between 17-27℃ or to set it 'on/off'.
6. Press the "Weekly Timer" button a sixth time to move to the next day. The display will
show '2d' - the operation method is the same as above.
7. Repeat the above steps for each day of the week. Note: lf no button is pressed within
10 seconds during the time setting, the unit will automatically exit the 7-day weekly
timer setting.
20