Setting The Receiver To Turn The Switch On/Off - Jeti Model Sp-15-Opto Bedienungsanleitung

Elektronic Switch Elektronic Switch
1.3 Setting the receiver to turn the switch
on/off
n the JETI DC/DS transmitter,
create a function and name it as you wish (Figure:
Functions Assignment). In the picture above, for example,
SP 15 OPTO.
• Assign a control switch to this function, ideally a two-
position switch.
• Assign the created function to a free channel on the
receiver (Figure: Servo Assignment). In the image above,
for example, channel 8.
• Connect the JR connector of the SP 15 OPTO switch to the
exact control output on the receiver (8).
•
I
18
EN